Recently, we were approached to build a custom ramp for use on a farm in Bowling Green, Ohio. The ramp, with a 20,000-pound capacity needed to be 99 inches wide. The customer required a ramp with greater width in order to load material onto a drop deck trailer.
With over 60 years of experience, Copperloy has become an industry leader in dock equipment and yard ramps. Our team of professionals is always up to the challenge of finding solutions to new problems. With our in-house engineering department, we can help design a custom product that will meet the needs of virtually any application. We can then turn that design into reality in our 70,000 square-foot steel fabrication facility.
The standard yard ramps built by Copperloy are 36 feet long, available in widths of either 70 or 84 inches, and capacities from 16,000 to 60,000 pounds. From time to time, however, we are asked to build a custom ramp to meet the specific needs of one of our clients.
A ramp with a width of 99 inches presented a new problem: it would not fit into a standard shipping container. We, therefore, had to weld a 91-inch custom extension plate to the top of the ramp, allowing access into seaport containers.
The finished custom ramp is 36 feet long with an 8-foot level off on top. The length and the level off are both standard. Although this particular client did not require it, we are also able to customize a ramp to have a 10-foot level off.
This ramp will need to be moved from farm to farm, a distance of roughly one mile. So, the customer requested the tow bar option, which will allow it to be towed at a low speed of 3 to 5 mph.
This is certainly one of the more singular custom ramps we have built to date. So, if one of our standard yard ramp, dock ramp or loading dock equipment solutions don’t quite meet your needs, the pros at Copperloy are ready to design and build a custom solution that is right for you.